Control Panel Elentek Drytek Pro 380V

Control panel with microprocessor for 1 single-phase or three-phase pump with power factor control. The ideal system for protecting the pump against dry-running. Practical and versatile, Drytek Pro allows save the time of installation and reduces service costs.

Drytek Pro control panels are assembled in ABS thermoplastic boxes with an original Elentek design, watertight, self-extinguishing, degree of protection IP55.
The Drytek Pro has a practical LCD for reading the operating and alarm states, besides led lights and set-up pushbuttons on the front panel. External controls such as pressure and float switches can be connected to the terminal inside the panel.
All the set-up, control, and use operations are done by the front panel without the need to open the control box.

GENERAL FEATURES

• Power supply 3~50/60 Hz 400V ±10%;
• Normally open contact for start;
• Pushbuttons for selecting operation and set up;
• Displaying of: volt, ampere, motor power factor (COS Ø) and alarms;
• Green led indicating motor running;
• Adjustable electronic control for motor overload;
• Motor’s control on 2 phases;
• Protection from:
  • motor overcurrent (adjustable)
  • phase failure/loss
  • min/max voltage (adjustable)
  • max current (adjustable)
  • dry running power factor (COS Ø adjustable)
• Auto-restore from protection with 4 independently settable times 0÷250 minutes;
• Auxiliaries and motor protection fuses;
• Alarm output (NC-C-NO resistive load 5A / 250V);
• Main switch interlocking door;
• Enclosure in ABS, IP55;
• Ambient temperature: -5/+40 °C;
• Relative humidity 50% at 40 °C (not condensed).