Electromagnetic Flow Meter MAG-C
Price On Request
The electromagnetic flow meter model MAG-C has been engineered so to measure the flow and the volume of any liquid that is the electrical conductor.
The electromagnetic flow meter model MAG-C has been engineered so to measure the flow and the volume of any liquid that is the electrical conductor. Those flow meters do not have any mechanical moving component, and therefore the liquid does not have any obstacle in its flowing, thus avoiding any damage caused by solids that can be in the liquid. The internal part of the measuring pipe is electrically insulated and therefore the liquid to be measured does not have any possibility to be in contact with the material by which the pipe and the flanges are made. That allows the possibility of measuring any type of liquid compatible with the internal cladding.
The MAG-C meters enjoys a very low head of loss and the possibility of mounting in every position and therefore are suitable for every sector of the chemical, paper, food industries and waterworks.
|Available diameters||DN 15 -> DN 2000|
|Available pressure||PN10, PN16, PN25, PN40|
|Available flanges||UNI EN 1092, ANSI150, ANSI300, DIN2501, BS45404, AWWA|
|Max reading error||±0,2%|
|Max fluid speed||10 m/s|
|Electrical conductivity||≥ 10μS/cm|
|Available linings||PTFE, EBONITE|
|Max fluid temperature||-40°C /+80°C|
|Pipe material||Stainless steel AISI 304|
|Flanges material||Carbon steel|
|Electrodes material||HASTELLOY C|
|n° Electrodes||3 (<DN50) 4 (≥DN50)|
|Available power supply||90 ÷ 264 VAC or 24 VDC|
|Display||LCD graphic 128 x 64pixels retrofit|
|Out signals (powered version)||4-20mA, pulse, frequency, MODBUS RTU RS485, Hart protocol|
|Out signals (battery version)||Pulses|
|External communication interface||IrDA for PC connection, MODBUS on RS485|
|According to standards||89/336/EEC EN61326-1:2006 2006/95/EC EN ISO 6817|