Electromagnetic Flow Meter RLMAG

Price On Request

In stock

  • Flow rate and temperature measurement
  • Accuracy <(± 0.8% of the measured value +0.5% of full scale)
  • Measuring body totally in AISI 316L
  • Internal coating in PEEK
  • Fully configurable measurement, monitoring, and dosing functions
  • Bidirectional measurement
  • Max pressure 16bar; max. temperature 70 ° C
  • Threaded process connections
  • Color display with 90 ° rotation display

Measuring device suitable for measuring values from a minimum of 0.04l / m (DN5) up to a maximum of 100l / m (DN15). The body totally in AISI 316L makes the instrument suitable also for chemical/food applications. The reduced dimensions and the variety of threaded connections allow an easy and quick mechanical installation. Rotating the display of the TFT display allows horizontal or vertical mounting orientation.


Range of flow Processing of signals coming from fluids with speeds up to 10m / s in both directions (bidirectional meter)
Process Connection / Internal Dimension G ½” / 5mm
G ¾” / 10mm
G 1″ / 15mm
Internal lining material PEEK
Sensor body material AISI 316L
Electrode material AISI 316L
Measuring range 0.04l / m to 100l / m
Accuracy <(± 0.8% of the measured value + 0.5% of the full scale)
Electrical connection 4-pin M12x1 connector
Repeatability ± 0.2% of full scale
Supply voltage 19 ÷ 30Vdc
Consumption Max. 200mA
Temperature range Process temperature: -20 ÷ + 70 ° C
Ambient temperature: -20 ÷ + 60 °
Output signals max N.2 outgoing connections configurable separately as:
Analogue output 4 ÷ 20mA, or 0 ÷ 20mA with max 500Ω / 0 ÷ 10V
Configurable pulse output
Output frequency max 1000Hz (2000Hz alarm overflow)
PNP alarm output, or configurable NPN; max 30Vdc 200mA
Control input max 30Vdc
Dosing control output for START-STOP-RESE measurable
Reverse flow Instant measurement and total reverse flow
Flow measurement simulation Various flow measurement simulation modes are available
Range cutoff Adjustable. Below the set value the display of the instantaneous flow and the outputs are forced to zero.
Relative humidity 40 ÷ 100% RH at 65 ° C, without condensation
Response time for alarm outputs (integration) Adjustable between 0 and 6 seconds
Protection IP67

Main Menu