Oil/Water Interface Meter Solinst Model 122M
These meters provide their owners with precise and legible measuring of degree and density of liquids in drill holes and wells.
Product Description
These meters provide their owners with precise and legible measuring of degree and density of liquids in drill holes and wells.
Such meters can easily and quickly find data about both floating liquids (LNAPL) and sinking ones (DNAPL).
Equipped with a laser marked wire, it is very compact and fit perfectly for working in hard-to-reach conditions for example in narrow wells. This PVDF wire is available in 25 m length.
The device can offer 300 hours of working without charging the 9v battery, serving as the energy source, distinct signals and extreme level of precision.
Oil Water Interface Meter Solinst Model 122M Hazardous Locations Use:
This model was tested and ratified for explosive surroundings usage. According to the QPS, they are appropriate for places of high hazard.
The earthing strap is very important for security while the meter is being used in possibly explosive surroundings. It also guarantees reliable protection of the electronic details.
P8 Probe:
This model is equipped with a 16 mm P8 Probe, able to stand against high pressures (500 psi max). The tip, which emits the light, has a reliable protection – a shield.
Laser Marked PVDF Cable:
The tape is perfectly precise with its laser markings and is produced according to NIST and EU norms. It will serve for a long time due to the PVDF covering. The tape prevents adhering to wet walls. It is chemical proof and the usage is simple due to the sleek surface.
Oil Water Interface Meter Solinst Model 122M Operating Principles:
Detecting liquids has a following mechanism, including an IR-beam and sensor: in the moment of touching the surface, the beam refracts from the sensor, and this turns the audio-signal and light on.
In case the liquid is an oil or any other kind of liquid which doesn’t conduct electricity, the signals are not disturbed. If the probe deals with water or other conductive liquid, the circuit is completed and the IR-circuit is then rejected. The signals become unstable.
The precision of the detector reaches 1.0 mm, which allows it to find the smallest oil spot.
Oil Water Interface Meter Solinst Model 122M Features:
- Accuracy to 1.0 mm
- Tested and secure
- 16 mm probe
- 9V battery
- Long lasting battery within easy reach: minimum 300 hours of working
- Same tapes with other Meters
- Small and fit in a backpack
- Reliable tested electronics
- Designed for field use
You may also like…
-
Details
These meters provide their owners with precise and legible measuring of degree and density of liquids in drill holes and wells.
-
Details
H.OIL is designed specifically for measuring both liquids, which are found in one place.
-
Details
Oil/Water Interface Meter Heron Sm.OIL is designed specifically for measuring both liquids, which are found in one place.
-
Details
The Geotech’s oil/water interface meter is a robust and accurate device to detect and measure the thickness of floating and dense non-aqueous fluids in a water well, tank or natural reservoir.
