The Alexis® compact peristaltic pump can either run on its self-contained internal 22 amp AGM battery or plug it into a 220 volt electric socket. The Alexis® only weighs 21 pounds making this peristaltic pump lightweight and extremely durable. The rugged Pelican™ 1430 case enclosure is made of impact and corrosion resistant ABS plastic to withstand demanding work conditions. Incorporating the most accurate and precise variable speed controller for consistent flow rates ensures the technician reliable sample integrity. The Alexis® peristaltic pump includes a built-in digital display and sealed push buttons to control several unique functions of this diversified peristaltic pump.
Constant Voltage Boosting Technology (CVBT)
Proprietary system that boosts a “low voltage battery” to an amazing range of 13.5 volts. That means faster water discharge rates and more consistent pumping rates. Which in turn makes your next groundwater field sampling event a profit center!
Masterflex Easyload™ 2 pump head design
Super fast tubing load times; No more stretching and jamming silicon tubing through the pump head and defiantly no more fiddling with screws to gain access to the pump head. Located on the side of the rugged Pelican case exterior allowing the user to easily shut the enclosure.
Long Lasting Internal AGM Battery with Precise Push Button Technology
An amazing 22 Amp AGM rechargeable long life internal battery! The benefits of a 22 Amp AGM battery means you get extra long sampling runs. How does up to 7 hours of continuous sampling running at a full 100%! Now you will get the job done faster by eliminating the need to carry an external battery for your small peristaltic pumps and always fearing that you may run the battery out during long sampling events (or even worse off forgetting the battery at the office). With the convenient internal battery charger indicator you will know exactly how much battery power is left with a simply push of a button! Have a power supply? With the AC or 12v DC adapters you can setup and run your Alexis® peristaltic pump indefinitely.
Super strong – Light weight Pelican™ 1430 case
The Alexis® small peristaltic pump utilizes a Pelican™ 1430 case that lends hand to hand durability and weighs only 13 kg. The rugged Pelican™ case enclosure is made of impact and corrosion resistant ABS plastic to withstand demanding work conditions.
Tell Me More LCD Display
Tells you real time flow control. That means you will visually see your current setting on the LCD screen when retrieving a sample.
Low Voltage Disconnect Warning (LVD)
Simply put, the LVD is a “battery saver device”. If the internal battery should ever fall below 10.75 volts into the critical “red” level of the internal battery charger indicator area then the Alexis® will start to pulsate or lose noticeable power. In short, the LVD tellingyou that the internal battery needs a charge. This advanced technology will prolong thelife of the internal battery and the Alexis® peristaltic pump as a whole.
Auto Reset Internal Fuse
If you should reverse polarity when hooking up the Alexis® peristaltic pump to an external battery, the built in internal resettable fuse will engage causing the pump to shut off for 30 seconds. After 30 seconds the resettable fuse will engage allowing the field technician to once again turn the pump back on. The internal resettable fuse will also “engage in safety mode” if it recognizes a sudden surge in amps.
Pump up to 1.9 litres Per Minute or as low as 40mL per minute
Suction lift up to 8 mt
Comes complete with pump head
AC adapter for 220 volt direct plug in
4.5 mt of DC battery clamps to hook up for super long sampling events
Product Dimensions: Width 45.72 cm x Depth 21.59 cm x Height 34.29 cm
Weight of Product: 13 kg