Nastec offers a range of high-quality solar powered water pumps and inverters that provide efficient and sustainable solutions for water pumping in various applications.

  • QED AutoPump AP2

    • Efficient operation in wells with diameters as small as 2″
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function and pumps particles up to 1/8 inch in diameter.
    • Able to pump products with specific gravity as low as .72
    • Viscous pumps able to pump liquids up to 7,000 cSt
    • 5 Year Warranty
    Price On Request

    QED AutoPump AP2

    Price On Request
  • QED SOS AutoGenie Active Skimmer

    • SOS (selective oil skimmer) uses a hydrophobic screen float, designed to recover less viscous hydrocarbons
    • All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
    • The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
    • The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
    • The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
    • A complete line of matched accessories is available to help with installation and performance
    Price On Request
  • QED SPG AutoGenie Active Skimmer

    • SPG (specific gravity) uses a float with a controlled specific gravity, designed to recover more viscous hydrocarbons
    • All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
    • The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
    • The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
    • The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
    • A complete line of matched accessories is available to help with installation and performance
    Price On Request
  • QED AutoPump AP4 Ultra – Xtreme

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4.5 Ultra – High Temperature

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4.5 Ultra – High Clearance

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4 Ultra – High Viscosity

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4 Ultra – High Temperature

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4+ for Aggressive Fluids

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Stainless steel parts have been upgraded to 316-grade and nonmetallic internal parts are PVDF
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter
    • The AP4+ air valves can pass 90-weight oil without fouling
    • Able to pump products with specific gravity as low as .72
    • Viscous pumps able to pump liquids up to 7,000 cSt
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4 Ultra

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request

    QED AutoPump AP4 Ultra

    Price On Request
  • Nastec CM MultiPower Control Module

    • Control the electric parameters (current, power, voltage)
    • Record and store all the alarms related to the working hours
    • Connect a pressure or a flow sensor to monitor the pump’s performance
    • Connect a pressure or float switch
    • Provide an alarm digital output for remote control
    Price On Request
  • Nastec NERA Stop Module

    • MC4 connectors for fast and easy panels connection
    • Button for pump start and stop
    • Connection for float or pressure switch
    • Surge protection
    Price On Request

    Nastec NERA Stop Module

    Price On Request
  • Nastec 4HS 08/05 MP

    • Voltage 90-400 VDC / 90-265 VAC
    • Max current 16 A (187 VDC) / 16 A (187 VAC)
    • Power factor 1
    • Max power P1 3000 W
    • Length 950 mm
    • Discharge 1 1/2″ / 2″
    • Pump weight 21 Kg
    • Max diameter 99 mm
    Price On Request

    Nastec 4HS 08/05 MP

    Price On Request
  • Nastec 4HS 08/03 MP

    • Voltage 90-400 VDC / 90-265 VAC
    • Max current 16 A (113 VDC) / 16 A (113 VAC)
    • Power factor 1
    • Max power P1 1800 W
    • Length 858 mm
    • Discharge 1 1/2″ / 2″
    • Pump weight 19,4 Kg
    • Max diameter 99 mm
    Price On Request

    Nastec 4HS 08/03 MP

    Price On Request
  • Nastec 4HS 05/08 MP

    • Voltage 90-400 VDC / 90-265 VAC
    • Max current 16 A (187 VDC) / 16 A (187 VAC)
    • Power factor 1
    • Max power P1 3000 W
    • Length 1013 mm
    • Discharge 1 1/2″
    • Pump weight 22 Kg
    • Max diameter 99 mm
    Price On Request

    Nastec 4HS 05/08 MP

    Price On Request

Main Menu