English
German
French
Spanish
B Meters offers a wide range of domestic and industrial water meters, including flow meters, that are reliable, accurate, and suitable for various applications.
-
Pulse Emitter IWM-PL3
IWM-PL3 is suitable for many applications for remote reading in the residential, commercial and industrial sectors, acting as an electronic impulse that allows the acquisition of the consumption of the counter by third-party systems with a universal interface and integrating advanced counting and detection functions frauds.
Price On RequestPulse Emitter IWM-PL3
Price On Request -
Water Meter B Meters GMDM-I
Multi-jet, dry dial, magnetic transmission with 360° rotating lid. Versions for cold water up to 50°C. Inductive pre-equipment for the installation of data communication modules M-BUS wired and wireless OMS and non-magnetic pulse output.
From: 29.00 €Water Meter B Meters GMDM-I
From: 29.00 € -
QED AutoPump AP2
- Efficient operation in wells with diameters as small as 2″
- 100% air-powered operation
- Corrosion-resistant 316-grade stainless steel metallic parts
- Reliable air control mechanism
- Ideal for high-temperature applications
- ATEX Certified
- Functions under positive or negative (vacuum) pressure environments
- Does not require clean dry air to function and pumps particles up to 1/8 inch in diameter.
- Able to pump products with specific gravity as low as .72
- Viscous pumps able to pump liquids up to 7,000 cSt
- 5 Year Warranty
Price On RequestQED AutoPump AP2
Price On Request -
QED SOS AutoGenie Active Skimmer
- SOS (selective oil skimmer) uses a hydrophobic screen float, designed to recover less viscous hydrocarbons
- All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
- The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
- The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
- The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
- A complete line of matched accessories is available to help with installation and performance
Price On RequestQED SOS AutoGenie Active Skimmer
Price On Request -
QED SPG AutoGenie Active Skimmer
- SPG (specific gravity) uses a float with a controlled specific gravity, designed to recover more viscous hydrocarbons
- All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
- The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
- The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
- The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
- A complete line of matched accessories is available to help with installation and performance
Price On RequestQED SPG AutoGenie Active Skimmer
Price On Request -
QED AutoPump AP4 Ultra – Xtreme
- Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
- 100% air-powered operation
- Corrosion-resistant 316-grade stainless steel metallic parts
- Reliable air control mechanism
- Ideal for high-temperature applications
- ATEX Certified
- Functions under positive or negative (vacuum) pressure environments
- Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
- Air valves can pass 90-weight oil without fouling.
- Able to pump products with specific gravity as low as .72
- 5 Year Warranty
Price On RequestQED AutoPump AP4 Ultra – Xtreme
Price On Request -
QED AutoPump AP4.5 Ultra – High Temperature
- Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
- 100% air-powered operation
- Corrosion-resistant 316-grade stainless steel metallic parts
- Reliable air control mechanism
- Ideal for high-temperature applications
- ATEX Certified
- Functions under positive or negative (vacuum) pressure environments
- Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
- Air valves can pass 90-weight oil without fouling.
- Able to pump products with specific gravity as low as .72
- 5 Year Warranty
Price On RequestQED AutoPump AP4.5 Ultra – High Temperature
Price On Request -
QED AutoPump AP4.5 Ultra – High Clearance
- Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
- 100% air-powered operation
- Corrosion-resistant 316-grade stainless steel metallic parts
- Reliable air control mechanism
- Ideal for high-temperature applications
- ATEX Certified
- Functions under positive or negative (vacuum) pressure environments
- Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
- Air valves can pass 90-weight oil without fouling.
- Able to pump products with specific gravity as low as .72
- 5 Year Warranty
Price On RequestQED AutoPump AP4.5 Ultra – High Clearance
Price On Request -
QED AutoPump AP4 Ultra – High Viscosity
- Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
- 100% air-powered operation
- Corrosion-resistant 316-grade stainless steel metallic parts
- Reliable air control mechanism
- Ideal for high-temperature applications
- ATEX Certified
- Functions under positive or negative (vacuum) pressure environments
- Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
- Air valves can pass 90-weight oil without fouling.
- Able to pump products with specific gravity as low as .72
- 5 Year Warranty
Price On RequestQED AutoPump AP4 Ultra – High Viscosity
Price On Request -
QED AutoPump AP4 Ultra – High Temperature
- Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
- 100% air-powered operation
- Corrosion-resistant 316-grade stainless steel metallic parts
- Reliable air control mechanism
- Ideal for high-temperature applications
- ATEX Certified
- Functions under positive or negative (vacuum) pressure environments
- Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
- Air valves can pass 90-weight oil without fouling.
- Able to pump products with specific gravity as low as .72
- 5 Year Warranty
Price On RequestQED AutoPump AP4 Ultra – High Temperature
Price On Request -
QED AutoPump AP4+ for Aggressive Fluids
- Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
- 100% air-powered operation
- Stainless steel parts have been upgraded to 316-grade and nonmetallic internal parts are PVDF
- Reliable air control mechanism
- Ideal for high-temperature applications
- ATEX Certified
- Functions under positive or negative (vacuum) pressure environments
- Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter
- The AP4+ air valves can pass 90-weight oil without fouling
- Able to pump products with specific gravity as low as .72
- Viscous pumps able to pump liquids up to 7,000 cSt
- 5 Year Warranty
Price On RequestQED AutoPump AP4+ for Aggressive Fluids
Price On Request -
QED AutoPump AP4 Ultra
- Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
- 100% air-powered operation
- Corrosion-resistant 316-grade stainless steel metallic parts
- Reliable air control mechanism
- Ideal for high-temperature applications
- ATEX Certified
- Functions under positive or negative (vacuum) pressure environments
- Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
- Air valves can pass 90-weight oil without fouling.
- Able to pump products with specific gravity as low as .72
- 5 Year Warranty
Price On RequestQED AutoPump AP4 Ultra
Price On Request -
Gas Powered Core Sampling Kit
The complete set contains: Gas Powered REDI Boss Hammer, (1) 4ft. Deluxe AMS Carrying Case, (1) 3ft. Deluxe AMS Carrying Case, GP Slotted Sampler Tube 4ft., (2) GP Upper Extensions 2ft., (2) GP Lower Extensions 2ft., GP Drive Head Adapter, (2) 12in. Pipe Wrenches, Clean Out Spoon, GP Drive Tip, GP Liner Retainer Coupler, AMS Foot Jack, 2in. Foot Jack Shackles (1 Set of 2), 1-1/2in. Core Catcher, Cleaning rods with brushes & T-handle, (4) plastic end caps, (1) plastic liner 1.5in. x 4ft & (1) plastic liner 1.5in. x 2ft.
Price On RequestGas Powered Core Sampling Kit
Price On Request -
2″ Stainless Steel Flighted Auger Kit
Kit includes: 5/8″ threaded male to SDS Max adapter, 1 1/2″ x 6″ soil core sampler, slide hammer, 2″ flighted lead auger with hard-surfaced tip, 2″ carbide tip, two 2″ x 3′ flighted extensions, three 5/8″ x 4′ extensions, universal slip wrench, 1 1/2″ x 12″ nylon brush, AMS deluxe carrying case.
Price On Request2″ Stainless Steel Flighted Auger Kit
Price On Request -
2″ Flighted Auger Kit
Kit includes: 5/8″ threaded male to SDS Max adapter, 1 1/2″ x 6″ soil core sampler, slide hammer, 2″ flighted lead auger with hard-surfaced tip, 2″ carbide tip, two 2″ x 3′ flighted extensions, three 5/8″ x 4′ extensions, universal slip wrench, 1 1/2″ x 12″ nylon brush, AMS deluxe carrying case.
Price On Request2″ Flighted Auger Kit
Price On Request
