Nastec offers a range of high-quality solar powered water pumps and inverters that provide efficient and sustainable solutions for water pumping in various applications.

  • Pulse Emitter IWM-PL3

    IWM-PL3 is suitable for many applications for remote reading in the residential, commercial and industrial sectors, acting as an electronic impulse that allows the acquisition of the consumption of the counter by third-party systems with a universal interface and integrating advanced counting and detection functions frauds.

    Price On Request

    Pulse Emitter IWM-PL3

    Price On Request
  • Water Meter B Meters GMDM-I

    Multi-jet, dry dial, magnetic transmission with 360° rotating lid. Versions for cold water up to 50°C. Inductive pre-equipment for the installation of data communication modules M-BUS wired and wireless OMS and non-magnetic pulse output.

    Water Meter B Meters GMDM-I

    From: 29.00 
  • QED AutoPump AP2

    • Efficient operation in wells with diameters as small as 2″
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function and pumps particles up to 1/8 inch in diameter.
    • Able to pump products with specific gravity as low as .72
    • Viscous pumps able to pump liquids up to 7,000 cSt
    • 5 Year Warranty
    Price On Request

    QED AutoPump AP2

    Price On Request
  • QED SOS AutoGenie Active Skimmer

    • SOS (selective oil skimmer) uses a hydrophobic screen float, designed to recover less viscous hydrocarbons
    • All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
    • The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
    • The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
    • The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
    • A complete line of matched accessories is available to help with installation and performance
    Price On Request
  • QED SPG AutoGenie Active Skimmer

    • SPG (specific gravity) uses a float with a controlled specific gravity, designed to recover more viscous hydrocarbons
    • All Genie skimmer systems pump the LNAPL using a special bladder pump with high suction capability, positioned above the floating inlet section of the system
    • The use of a bladder pump eliminates air contact with the LNAPL fluids, minimizing emulsification and eliminating VOC emissions
    • The AutoGenie uses an integral pneumatic timer to control the pump fill and discharge times
    • The Programmable Genie uses an electronic controller mounted outside the well to allow adjustment of pump cycles and off times
    • A complete line of matched accessories is available to help with installation and performance
    Price On Request
  • QED AutoPump AP4 Ultra – Xtreme

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4.5 Ultra – High Temperature

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4.5 Ultra – High Clearance

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4 Ultra – High Viscosity

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4 Ultra – High Temperature

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4+ for Aggressive Fluids

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Stainless steel parts have been upgraded to 316-grade and nonmetallic internal parts are PVDF
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter
    • The AP4+ air valves can pass 90-weight oil without fouling
    • Able to pump products with specific gravity as low as .72
    • Viscous pumps able to pump liquids up to 7,000 cSt
    • 5 Year Warranty
    Price On Request
  • QED AutoPump AP4 Ultra

    • Proprietary non-stick finishes on float and discharge tubes to reduce solids buildup
    • 100% air-powered operation
    • Corrosion-resistant 316-grade stainless steel metallic parts
    • Reliable air control mechanism
    • Ideal for high-temperature applications
    • ATEX Certified
    • Functions under positive or negative (vacuum) pressure environments
    • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter.
    • Air valves can pass 90-weight oil without fouling.
    • Able to pump products with specific gravity as low as .72
    • 5 Year Warranty
    Price On Request

    QED AutoPump AP4 Ultra

    Price On Request
  • Nastec CM MultiPower Control Module

    • Control the electric parameters (current, power, voltage)
    • Record and store all the alarms related to the working hours
    • Connect a pressure or a flow sensor to monitor the pump’s performance
    • Connect a pressure or float switch
    • Provide an alarm digital output for remote control
    Price On Request
  • Nastec NERA Stop Module

    • MC4 connectors for fast and easy panels connection
    • Button for pump start and stop
    • Connection for float or pressure switch
    • Surge protection
    Price On Request

    Nastec NERA Stop Module

    Price On Request
  • Nastec 4HS 08/05 MP

    • Voltage 90-400 VDC / 90-265 VAC
    • Max current 16 A (187 VDC) / 16 A (187 VAC)
    • Power factor 1
    • Max power P1 3000 W
    • Length 950 mm
    • Discharge 1 1/2″ / 2″
    • Pump weight 21 Kg
    • Max diameter 99 mm
    Price On Request

    Nastec 4HS 08/05 MP

    Price On Request

Main Menu